Made of high-quality aluminium, perfectly dust- and water-tight, this key pocket lamp is perfect for daily transport.

Characteristics :

Maximum power of 200 lumens; Maximum beam range of 49 meters.

LED white Cree XP-G2 S3, a lifetime of 50,000 hours.

Li-polymer battery 120 mAh integrated.

Micro USB charging port for direct load.

Torso for the selection walk/stop and brightness.

Integrated design of light head and tail.

High efficiency lens with total reflective coating.

Made of durable A6061-T6 aluminium.

Anti-abrasive finish anodized hard type HAIII high-end.

Size: 48 x 15 x 14 mm.

Weight: 15 grams.

Technical features:TURBO light power with 16340 battery: 700 lumens / range 1h05 / Range 142m / Intensity 5050cdTURBO light power with a CR123A battery (cold-resistant): 300 lumens / range 1h55 / Range 93m / Intensity 2160cdHAT light power with a battery 16340 : 150 lumens / range 2h / Range 66m / Intensity 1100cdHAT light power with a CR123A battery : 150 lumens / range 2h50 / Range 66m / Intensity 1100cd light power MOYEN with a battery 16340 : 30 lumens / range 11h55 / Range 31m MOYEN with a battery CR123A : 30 lumens / range 25h / Range 31m / Intensity 240cdPuumens light BAS with a battery 16340 : 3 lumens / range 70h / Range 13m / Intensity 40cdPuis

Specific techniques:

MODE D EMPLOY

ON/OFF: Press the lighting head to light the lamp, loosen the head to turn off the lamp.

SELECTION OF PUISSANCE MODE: rotation of the lighting head to select the brightness level: turn there to activate the FAIBLE mode, activate a continuous rotation to activate the FORT mode.

TECHNICAL PARAMETERS:

FORT mode: power 200 lumens / autonomy 25 min / Range 49m / Intensity 591 candelas

FAIBLE mode: power 15 lumens / autonomy 6.5 hours / Scope 13m / Intensity 39 candelas

Fall resistance: one meter maximum

Immersion: IP68

Note: according to ANSI/PLATO FL1, the specifications above reveal results produced by FENIX thanks to the tests of its laboratory using the Li-polymer 120mAh battery integrated at a temperature of 21° +-3°C and humidity of 50% to 80%. The actual performance of this product may vary depending on the different working environments and the battery used.

Autonomy in FORT mode is the cumulative operating time, including reduced power due to the temperature or the built-in protection system.

RECHARGEMENT

1. Start by loosening the headlight to reveal the Micro USB charging port and plug the USB A socket of the charging cable into an electrical socket and then connect the Micro USB socket of the charging cable to the lamp.

2. The indicator will be displayed in red during loading and will become green when it is finished.

3. Once the load is finished, specify to tighten the head of lighting to maintain the anti-dust capacity and sealing.

Note:

1. Reload the lamp in time when the battery power becomes too low to ensure normal operation.

2. The normal charging time of an empty battery is about 1 hour to the full charge.

3. Reload a lamp stored every four months to maintain the optimum battery performance.

USE AND TRETIAN

Demonstrating the head that is sealed from the lamp may damage it and thus cancels the warranty.

Desert the head of lighting to avoid accidental activation during storage or transport.

Over the long term, the coil can deteriorate.

To maintain a perfect seal, it will be necessary to replace it with an approved one.

CONTENTS

lamp FENIX E02R

micro USB charging cable

Key ring

replacement gasket

User manual

guarantee card

WARNING

This lamp is a high intensity lighting device that can cause damage to the user's eyes or to other people. Avoid directing light in the eyes of power.

This lamp will accumulate high heat when used for long periods, resulting in high body temperature. Pay attention to safe use to avoid burning kes.

All information provided in this manual is subject to change without notice.